Australian Magnetic Solutions
IMS Home Page
Search
Mining Equipment

MINING EQUIPMENT

In co-operation with MAGNAPOWER Ltd (one of the largest producers of Mining Magnetic Equipment in Europe and Africa) we provide Magnetic Separators for Mineral Processing and Magnets for Tramp Iron Removal.

MAGNETIC SEPARATORS FOR MINERAL PROCESSING
Magnarolls - High intensity rare earth permanent magnets Magnarolls

High intensity (10000 gauss) rare earth permanent magnets, for purification or concentration of dry granular materials, size range 75 microns up to 40mm. Rolls 75 and 100mm diameter, up to 1000mm wide; multiple pass configurations easily arranged. Enclosed versions available.

Details: Magnaroll 2000

Induced Rolls - High intensity electromagnets Induced Rolls

High intensity (20000 gauss) electromagnets, for purification or concentration of dry granular materials size range 45 microns up to 1mm.

Rolls 140mm diameter, up to 1000mm wide; standard configuration: Two pass or Three pass with low intensity permanent magnets scalping rolls. Enclosed versions available.

Dry Drums - Low intensity horizontal pole ferrite permanent magnets Dry Drums

Low intensity (1200 gauss) horizontal pole ferrite permanent magnets for magnetite iron ore concentration or removal of fine iron from granular materials.

Medium intensity (6000 gauss) horizontal pole rare earth permanent magnets for ilmenite concentration or removal of fine iron from powders.

Drums up to 900mm diameter, 2400mm wide.

Details: Magnadrum 2000


Wet Drums - Low intensity (2000 gauss) ferrite permanent magnets Wet Drums

Low intensity (2000 gauss) ferrite permanent magnets, for recovery of magnetite or ferrosilicon in HMS plants, magnetite concentration and recovery from other minerals.

Drums 900mm and 1200mm diameter up to 3000mm wide.

Tank designs, concurrent, countercurrent or semi-countercurrent.

Multiple stage configuration "magnetics" or "non-magnetics" retreatment.

All separators are available in sizes suitable for laboratory or pilot plants.

MAGNETS FOR TRAMP IRON REMOVAL
Suspension Magnets

Oil and air-cooled electromagnets for belt widths up to 2400 mm, working gaps up to 1000mm.

Permanent magnets for belt widths up to 1800mm, working gaps up to 600mm.

Suspension Magnets - Oil and air-cooled electromagnets
Overband Magnets

Oil and air-cooled electromagnets for belt widths up to 2400 mm, working gaps up to 1000mm.

Permanent magnets for belt widths up to 1800 mm, working gaps up to 600 mm.

"Cross-belt" or "In-line" arrangement.

Overband Magnets - Oil and air-cooled electromagnets
Magnetic Pulleys

Horizontal or vertical pole permanent magnets, for belt widths up to 2400mm, pulley diameters up to 900mm.

Magnetic Pulleys - Horizontal or vertical pole permanent magnets
Permanent Magnets

A wide range of designs with ferrite or rare earth permanent magnets. For installation in chutes, hoppers and pipelines (solids or liquids)

Permanent Magnets - A wide range of designs with ferrite or rare earth permanentmagnets